Wall Colmonoy and its Middle East Distributor, V-Liner FZC, is pleased to announce they will be exhibiting at ADIPEC (Abu Dhabi International Petroleum Exhibition and Conference) in Abu Dhabi, UAE from 4th-7th November. Find us on the Welsh Pavilion, Hall 8, Stand #8650.
Wall Colmonoy has long been a trusted supplier to the Oil & Gas Industry providing wear and corrosion solutions via its specially formulated products and offerings.
Colmonoy® and Wallex® Hardfacing Alloys
Wall Colmony’s Oil & Gas corrosion resistant alloys Colmonoy® (nickel) and Wallex® (cobalt) have special metallurgical and physical properties, ideal for addressing wear-related challenges in the Oil & Gas Industry. From exploration and drilling to pumping and refining, Wall Colmonoy’s hardfacing alloys have been extending the lifetime of Oil & Gas equipment for over 85 years.
Some application examples for the Oil & Gas Industry include:
- Stabilisers and Sleeves
- Pumps, Pump Shafts and Reciprocating Pump Plungers
- Wear Rings
- Gate Valves, Ball Valves and Seats, Regulator/ Choke Valves
- Plugs, Stab Pins and many more
Colmonoy® 25F Cementing Tungsten Carbide onto Integral Stabiliser
WallCarb™ HVOF Powders
Wall Colmonoy now offers WallCarb™ HVOF powders designed for thermal spray applications, offering dense, hard coatings with low porosity and excellent wear and corrosion resistance. WallCarb™ HVOF spherical, spray dried, and sintered powders enable high deposit efficiencies and consistent parameter settings, resulting in smooth coatings that reduce finishing and grinding times.
Photomicrograph of WallCarb™ 86/10/4 HVOF Powder at 200X
ColWear Vacuum Fused Wear Plates
Wall Colmonoy’s range of ColWear Vacuum Fused Wear Plates offer a unique solution to the most aggressive wear problems in wet or dry, hot or cold Oil & Gas environments.
ColWear Wear Plates protected with Colmonoy® (nickel), Wallex® (cobalt) or iron-based hardfacing alloys – last significantly longer than unprotected parts and other coated plates, reducing operational expense and plant downtime.
ColWear Plates are smooth, crack free, lightweight, have minimal dilution, and provide hardness down to the fusion line. ColWear Plates’ lightweight, thin construction from a weldable mild steel or stainless-steel backing plate enables ease of handling, forming and fabrication.
WallCarb™ Coatings for Mud Motor Bearings and Turbo Drills
WallCarb™ is a proven solution to extend the lifetime of key components in the Oil & Gas industry, providing exceptional bearing properties in the harshest working environments.
The success of WallCarb™ is due to its high packing density of spherical tungsten carbide particles matrix, providing a bearing surface with up to 90% tungsten carbide—significantly higher than PTA, HVOF, and Laser Cladding coatings.
WallCarb™ bearings showing spherical carbide particles. WallCarb™ can be coated on the interior and exterior diameter or on flat surfaces.
Cast or Fully Machined Components for Oil & Gas
Wall Colmonoy Limited (UK) has a state-of-the-art foundry and machining facility that produces castings, heat treatment and full component manufacture for many Oil & Gas customers – all from one source.
Developed to maximise operational efficiency, Wall Colmonoy’s Oil & Gas Components have been specially formulated with Colmonoy® or Wallex® superalloys to withstand impact, corrosion, abrasion, fretting, galling, and friction.
Specialising in Air/Vacuum Investment Casting along with Centrifugal, Sand Casting and Heat Treatment, Hot Isostatic Pressing (HIP) Processes, we offer components in the as cast, proof machined or finish machined condition.
Precisely machined components are finished on modern CNC machining centres on-site at our 23,500 Sq. Ft. Machine Shop. Our team are experts in machining the types of specialised hard metals cast in our foundry and are equipped with the necessary know-how and experience to produce excellent results.
Wall Colmonoy also offer full manufacture of coated components through different methods such as HVOF, PTA, Spray & Fuse and Laser Clad in a range of alloys.
Precisely Cast Machined Components for the Oil & Gas industry include:
- Antenna Pads
- Kicker, Clamp Plates
- Bushes, Cages, Impellers, Gears, Idlers
- Rotors, Stators, Sleeves, Balls, Plugs, Face Seal Support
- Valve Seats, Rings, Stem Guides, Inducers, Flow Straightener, Flow Cages
- Ball Valves, Gate Valves, Strainer, Seal Driver, Pulser Stator
- Turbines, Seat Retainer, Bearings
- Artificial Lift Pumps, Shaft Seal Retainer, Cable Protectors, Stems, and more
Wallex® 6 Inducer, Investment Cast for the Oil & Gas Industry.
To schedule an appointment with us at ADIPEC 2024 or to discuss your Oil & Gas needs:
